Electromagnetic Radiation Tester

Description:

One machine dual-use, simultaneous detection of electric and magnetic field radiation; sound and light alarm, automatic alarm beyond safety value; data lock, one-button lock radiation value; LCD graphic display radiation value trend; radiation evaluation, intimate reminder whether current radiation value is safe; appearance Stylish and easy to operate with one hand, easy to move or measure on site. 
PRECISE MEASUREMENT: Equipped with a built-in electromagnetic radiation sensor, which can display the radiation value on the clear LCD digital display after processing by control micro-chip. Testing magnetic field radiation with optional units mG/µT, the electric field with unit V/m. This emf meter can not test the RF value.
SOUND-LIGHT ALARM: When the testing result exceeds the value(0.4µT (4mG) or 40V/m), the screen will turn red and the indicator will be flashing, and the buzzer will alarm. If you’re testing some quiet areas, you can close the buzzer first, avoid disturbing the others.
MULTIFUNCTION: Testing average or peak value(Maximum) reading, and one key hold the data for a view. Large and back-light LCD is clear for viewing. Auto power off after 5 minutes without operation.
WIDELY APPLICATIONS: Mainly used for testing TV, computer, printer, microwave oven, refrigerator, cell towers, for low-frequency home appliances, and ghost hunting, etc.

Feature

1. This meter can test electric field radiation and magnetic field emission to reach the optimal test result. It is used to test and learn electromagnetic radiation situation indoor and outdoor. It is equipped with a built-in electromagnetic radiation sensor, which can display the radiation value on the LCD digital display after processing by control micro-chip.
2. One instrument with two uses,it can test the electric field and the magnetic field radiation at the same time.
3.Sound-light alarm,when the test result exceeds the safe value, the instrument will alarm automatically.
4.Data locking,one-key lock of the radiation value.
5.LCD display of the values for easier reading.
6.One meter with two uses
Testing the magnetic field and electric field. Automatic alarm above safe value(40V/m or 0.4μT/4mG).
Easy to operation
Operate with one hand and move or make field measurements. Automatically shut down after 5 minutes without operation.
Widely used
Mainly used to test microwave ovens, TVs, hairdryers, computers, low-frequency household appliances, wires, etc.

Specifications

Electric field：
Range: 1V/m-1999V/m
Alarm threshold: >40V/m
Resolution: 1V/m
Magnetic field:
Range: 0.01μT-99.99μT / 0.1 mG - 999.99 mG
Alarm threshold: >0.4μT / 4mG
Resolution: 0.01μT / 0.1 mG