HB100 microwave modules use the Doppler radar (Doppler Radar) design principles of the microwave moving object detectorit mainly used in automatic door control switchsecurity systemsATM ATMs automatic recording control systemautomatic train signals etc. HB100 is the standard 10.525GH..
1SHEELD TURNS YOUR SMARTPHONE INTO A RE-CONFIGURABLE ARDUINO SHIELD
Basically, 1Sheeld consists of two parts. The first part is a shield that is physically connected to your Arduino
board and acts as a wireless middle-man, piping data between Arduino and any Android smartp..
The HT 12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of N address bits and 12-N data bits. Each address/data input is externally trinary programmable if bonded out.
The HT 12D ICs are series of CMO..
Smallest Sim800L GSM/GPRS Module Micro Sim Card Core Board Quad-band TTL Serial Port
A GSM modem is a wireless modem that works with a GSM wireless network. GSM stands for Global System for Mobile communications, this architecture is used for mobile communication in most of the countries in the w..
On-board 2.4GHz Antenna
100m Range at 250kbps
250kbps to 2Mbit Data Rate
Multiceiver - 6 Data Pipes
32 Byte separate TX and RX FIFOs
5V tolerant input pins
Software selectable channel from 2400MHz to 2525MHz (125 Selectable channels)
RFID Tags 125KHz
Are you still looking for the RFID Proximity ID card keyfobs for Access Control use?
There are RFID Tags 125KHz proximity ID card keyfobs, with high-quality and can meet your need perfect.
Each comes w..
TX: Working current: Maximum <=40mA (12V), minimum <=9mA (3V); Resonant mode: SAW; Modulation mode: ASK / OOK; Working frequency: 31..
The wireless RF remote controls are widely used for data transmitting and signal control and are widely used in remote control garageroller curtaindoor locksindustrial control and wireless security alarm industry.
Product Name Wireless RF Remote Control Transmitter..
HC-12 SI4463 wireless microcontroller serial 433 long-range 1000M with Antenna
HC-12 module has three serial pass-through mode, using FU1, FU2 and FU3 said. When used, the various models are just to send and receive serial data, wireless transmission portion of the air tube...
GPS modules NEO-6M, 3V-5V power supply Universal
Module with ceramic destined antenna, super signal
EEPROM power down to save the configuration parameters data
LED signal indicator
With data backup battery
The default baud rate: 9600
Mounting Hole 3mm
Module size 23mm * ..
Sticks out 7mm (0.2755") beyond USB port
Wireless Standards: IEEE 802.11n (draft), IEEE 802.11g, IEEE 802.11b
Host Interface: High speed USB2.0/1.1 interface
Data Rate: 802.11n: up to 150Mbps (downlink) and up to 150Mbps (uplink) , 802.11g: 54 / 48 / 36 / 24..
The UNO Based ESP8266 Nodemcu Development Board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU.
The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an ..
HC-05 Bluetooth Module Breakout
The Bluetooth Module Breakout is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamle..
HC-06 Wireless Serial 4 Pin Bluetooth RF Transceiver Module RS232 TTL New for Arduino
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,..
V3-4M bytes (32Mbits) FLASH NodeMcu Lua WIFI
WINDOWS driver USB to serial CH341 / CH340 installation package
Support WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / Server 2008 / Win7 / Win8 / Win8.1 32 Bit / 64 and MAC
Through Microsoft's digital signature authentic..
This is mini version serial GSM / GPRS core development board based on GPRS A6 module. It supports dual-band GSM/GPRS network, available for GPRS and SMS message data remote transmission.
The board features compact size and low current consumption. With power saving technique, the ..
SIM900 Quad-band GSM GPRS Shield Development Board for Arduino Antenna
Note: The SIM900 Board Input is 5-26V 2A,We Recommended current is more than 9V 2A
Ensure your SIM card is not locked
GPRS Shield Communication baud rate is 19200 BPS 8-N-1
The GPRS Shield is bas..
ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. This Ethernet LAN module connects directly to most microcontrollers.
The number “ENC28J60” a..
NFC is a popular technology in recent years. We often heard this work while smart phone company such as Samsung or HTC introduces their latest high-end phones. Almost all the high-end phone in the market support NFC.
Near field communication (NFC) is a set of standards f..
1. Brand new 4 in 1 Arduino IR Receiver Module Wireless Remote Control Kit
2. Remote controller equipped with 21 buttons numbers for you to control
3. Launch distance is more than 8m and it is related to the surrounding environmentthe sensitivity of receiver and other factors