- Stock: In Stock
- Model: Magnetic - Plastic
- Weight: 150.00g
- Dimensions: 27.00mm x 22.00mm x 22.00mm
Description:
A flow switch, sometimes referred to as a flow sensor or flow indicator, is a device used to monitor the flow rate and pressure of liquids, air or other gaseous media through a duct, system or loop.
These switches or sensors can be used to monitor flow over a given period of time, or set up to continuously monitor total flow. Technically, a flow meter or indicator may not necessarily be a true flow ‘switch’ - if the device only registers and displays information, it’s more properly called a meter or indicator.
In most cases, though, they’ll be able to trigger actions or stop/start other components elsewhere in the system - pumps, for example - in order to adjust flow rate and pressure to the desired and programmed levels. This is then a true flow switch.
Features:
- Magnetic water flow switch
- Low cost flow switch.
- Long life, excellent performance flow sensor.
- No Standby power requirement.
- Excellent performance.
Specification:
- Suitable ambient temperature ≥1°C
- Suitable working temperature ≤100°C
- Minimum starting flow ≥ 0.75L/min
- The maximum flow rate ≤5L/min
- Rated working pressure ≤ 0.65Mpa
- The maximum pressure of the shell ≤ 1.5Mpa
- Signal output load DC24V/1A, AC36V/1A or AC220V/0.1A
Adaptation scope and conditions:
(1) The ambient temperature is not lower than 0°C. Do not beat the shell. Keep away from magnetic objects.
(2) The output of the signal is a switch, so the connection method of the control object must also be a switch control relationship.
(3) The power of the control object must not be greater than the signal load capacity.
(4) This device is a water medium control device and cannot be used for other media control.
Package include:
1 * Plastic Water Flow Sensor Switch