OLED 0.69" Blue I2C LCD Module for Arduino

OLED  0.69" Blue I2C LCD Module for Arduino

Description

This 0.69inch IIC OLED display is the graphic OLED display module made of 96x16 individual blue OLED pixels,diagonal is only 0.69 inch.The controller ic SSD1306, communicates via I2C serial interface only,thanks to controller's built-in voltage generation,only a single 3-5V power supply is needed. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast,extremely wide viewing angle and extremely operating temperature.The fpc is the soldering type,no need connector.Just solder the FPC on your PCB directly. It's easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held device.

Specifications

• OLED display, no need backlight, self-illumination,
• The display performance is better than the traditional LCD display, also lower consumption.
• Driver IC: SSD1306
• Size: 0.91 inch OLED
• Resolution: 128 x 32
• IIC interface
• Display Color: Blue
• GND: Power Ground
• VCC: Power + (DC 3.3 ~5v)
• SCL: Clock Line
• SDA: Data Line 
• IC: SSD1306
• Display type: OLED
• Brightness(Typ):150cd/m2
• Operating Temperature: -40℃~70℃
• Contrast Ratio(Typ): 10000:1
• Dimension:0.69 inch 
• Resolution:96*16
• Interface:IIC
• Light Color:blue