ESC 30A for Brushless Motor Electric Speed Controller

ESC 30A For RC Brushless Motor Electric Speed Controller 

Description:

The RC Electric Parts 30A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an Plug, eliminating the need for you to solder your own plugs on!

The ESC can be programmed via the transmitter, as explained in the instructions, or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it'll properly program the ESC.

Benefits:

1. Programmable either using a programming card or transmitter
2. Super smooth and accurate linear throttle adjustment
3. Supports high RPM motors.
4. Utilizes smaller MOSFETs to minimize weight.
5. Minimal heat loss

Specifications:

•  Model: HW30A
•  Material: Glass fiber 
•  Color: Yellow + red + black + blue
•  Constant Current: 30A 
•  Max Current: 40A(>10s)
•  Input: 5.6V - 16.8V
•  BEC output: 2A(linear mode)
•  Powered by 5 - 12 NiMH/NiCd or 2 - 4 LiPo
•  Low-Voltage Cutoff: Auto detect and set
•  Low resistance
•  Sixteen cells Max (with BEC disabled)
•  User programmable brake
•  Low voltage auto setting based on battery
•  Throttle range self-adjusting
•  Soft start ramp up
•  Auto motor cutoff with reset
•  Runs motor in forward or reverse
•  Safe power arming program ensures motor will not run accidentally after turn on 
•  Low torque start
•  Auto shut down when signal is lost
•  Size: 37cm x 2.5cm x 0.7cm
•  Weight:28g

Dimensions: 1.97 in x 0.98 in x 0.39 in (5.0 cm x 2.5 cm x 1.0 cm)
Weight: 0.85 oz (24 g)