Search Criteria
Products meeting the search criteria
Model: A4988
A4988 Stepper Motor Driver
Description:
The A4988 driver is a commonly used bipolar stepper motor driver that can provide up to 2A current per coil from 8V to 35V. These drivers are used to drive NEMA 17 motors on the Mill One. This driver also allows for up to 16th microstepping.
Each pack..
$ 7.05
Ex Tax:$ 7.05
Model: 2000W
DC Motor Speed Control PWM HHO RC Controller 12V 24V 48V 40A 2000W MAX PWM Controller Module with Switch
Description
Power requirement:10-50VDC Rated current: 40A（Maximum output current）Frequency : 12000HZ
It is fit all kinds of general-purpose and have a DC motor speed with brush. All kinds ..
$ 70.50
Ex Tax:$ 70.50
Model: DRV8825
DRV8825 Stepper Motor Driver
Description:
This is a break out board for DRV8825 microstepping bipolar stepper motor drive. It can drive a bipolar stepper motor with an output current of up to up to 2.5 A per coil. It is suitable for driving motors at wide range of voltages from 8.2 V to 45 V.
..
$ 9.87
Ex Tax:$ 9.87
Model: L9110S
Quantity: 1
Color: Black
Material: PCB board
Dual L9110S chipset motor driver
Input voltage: 2.5V~12V
Current: 800mA
Can drive two DC motors, and a 4-wire 2-phase stepper motor
Great for DIY project
Dimensions: 1.22 in x 0.87 in x 0.47 in..
$ 7.05
Ex Tax:$ 7.05
Model: MX1508
MX1508 Miniature Dual DC Motor Driver
Description:
This driver module is a small size dual engines, use for small projects where space is limited. The driver provides two channels of each 1.5 A (2.5 A peak), with overheating protection, thus eliminating the possibility of breakdown..
$ 7.05
Ex Tax:$ 7.05
Model: MG995
Servo Motor MG995 Metal Gear 180 Degree 15Kg
Description:
The MG995 is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larger servos.
Specifications:
Stall torque (4.8V): 13kg/cm
Stall torque (6.0V): 15kg/cm..
$ 21.15
Ex Tax:$ 21.15
Model: 5V 4-Phase
Stepper Motor 5V 4-Phase 5-Wire & ULN2003 Driver Board
Description:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use..
$ 16.92
Ex Tax:$ 16.92
Model: 17HS
Technical specifications:
* Step: 1.8 degrees;
* Current: 1.7 A;
* Rated voltage: 3.4 V
* Phase resistance: 3 ohm
* Holding torque: 0.35 Nm;
* Inductance: 2.5 mH;
* Dimensions:
* Body: 42 x 40 mm;
* Length: 34 mm;
* Shaft diameter 5 mm;
* Shaft length: 21 mm;
* Weight: 350 g;
..
$ 22.56
Ex Tax:$ 22.56
Model: L293D
L293D Quadruple Half-H DC Motor Driver
Description:
The L293 and L293D are quadruple high-current half-H drivers. The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-m..
$ 4.23
Ex Tax:$ 4.23
Model: DG01D
Gear Motor for Robot - Dual Shaft DC 3V t0 6V 100RPM 1.4Kg
DC motor reducer, dual axis, with DC 3V t0 12 operating voltage and a RPM of 100R / minute, this gear box is applied for tracing car or robot.
With plastic construction and yellow plastic shell, the DC gear motor measures approx. T..
$ 4.94
Ex Tax:$ 4.94
Model: L298N
Dual Full Bridge Driver ICs
Vertical Mount
Features:
- Operating Supply Voltage up to 46V
- Total DC Current up to 4A
- Low Saturation Voltage
- Overtemperature Protection
- Logical "0" Input Voltage up to 1.5V (High Noise Immunity)
Maximum Ratings:
Power Rating: 50.0V
Logic ..
$ 7.76
Ex Tax:$ 7.76
Model: SG90
SG90 9g micro Small Servo Motor 1.5KG
Description:
The SG90 9g micro small servo is a metal-geared analog servo from Power that delivers extra-high torque normally associated with much more expensive or larger servos.
Specifications:
T-pro Mini Servo Moto..
$ 9.17
Ex Tax:$ 9.17
Model: HW30A
ESC 30A For RC Brushless Motor Electric Speed Controller
Description:
The RC Electric Parts 30A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an ..
$ 22.56
Ex Tax:$ 22.56
Model: Wheels 65mm Rubber
RW002 wheels are original wheels from Dagu.These wheels are one of the commonly used components in Robotics .RW002 match with Geared motor DG01D and DG02S.
Features:
65mm diameter (including rubber grip)
30mm wide (including motor connector)
25mm (wheel base)
Rubber wheel on pla..
$ 3.53
Ex Tax:$ 3.53
Model: L298N H
L298N Module Dual H Bridge Stepper Motor Driver Board Modules
Specification:
Driver chip: L298N dual H-bridge driver chip
Terminal driver part of the supply area VMS: +5 V ~ +35 V
Drive part of the peak current Io: 2A / Bridge
Logical part of the terminal power supply range Vss :4.5-5..
$ 7.05
Ex Tax:$ 7.05
Model: 2AXSV
2 Axis Pan Tilt Camera or Sensor
Description:
2 Axis Pan Tilt Sensor Mount Kit nylon for small servos motors SG90 MG90 projects robots.
Specifications:
•100% Brand new and high quality;
•Only one set which is 6 plastic pieces with approx. 16 screws as shown in the picture , &b..
$ 7.05
Ex Tax:$ 7.05
%20-%20Twins%20Chip%201-250x250.jpg "A2212 Brushless Motor with Banana Plugs (930 KV)")
%20-%20Twins%20Chip%202-250x250.jpg "A2212 Brushless Motor with Banana Plugs (930 KV)")
Model: A2212
Technical specifications:
KV: 930
Maximum efficiency: 80%
Current at maximum efficiency: 4-10A (> 75%)
Current: 12A / 60s
Current in the naked @ 10V: 0.4A
Nr. of cells: 2-3 Li-Poly
Dimensions: Φ27.5 x 30mm
Axle diameter: Φ3.17mm
Internal resistance: 105 mΩ
We..
$ 16.92
Ex Tax:$ 16.92
Model: Toy 130
DC Hobby Motor Micro Motor Toy Motor DC Motor Type 130 for Robotic VEG92 P
Name:130 motor
Axial length:8mm
Diameter of axle:2mm
Specification:20*15*25mm
Rated voltage: 3V ~ 9V
No-load speed: 8000 r / min (max)
Load current: 100mA
Stall Current: 0.7A
Weight: 17 grams
Application:used to c..
$ 1.41
Ex Tax:$ 1.41
Model: MD556
Features
Patented technology
Pure-sinusoidal precise current control technology
Extreme low motor noise
Both driver and motor low heating
High performance, low cost
Supply voltage up to +50VDC, peak current to 5.6A
Optically isolated differential input signals
Pulse frequency up to 400 KHz..
$ 63.45
Ex Tax:$ 63.45
Model: MBHS
Rated Voltage Current : DC 6V ~ 12V , No Load Current: 0.2Amps (Max 1.2 Amps)
No load Power Consumption: 2.4 Watts (Max ~15 Watts)
No Load Speed: 14000RPM
Motor Shaft Diameter: 3.17mm
Motor Size 37.8 mm
Weight 166 g..
$ 19.74
Ex Tax:$ 19.74
Model: A3987
Description: The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 20V supply to power the motor and can power any voltage of stepper motor...
$ 11.99
Ex Tax:$ 11.99
Model: L293D
L293D Motor Drive Shield For Arduino - UNO & Mega
Description:
Arduino 3S Motor Driver Shield
The Arduino 3S Motor Driver Shield includes 4 H-Bridge drivers, allowing you to control up to 4 DC motors with independent control of speed and direction from your Arduino UNO, Diecimila, Duemila..
$ 11.28
Ex Tax:$ 11.28
