







- Stock: In Stock
- Model: Pico
- Weight: 150.00g
- Dimensions: 21.00mm x 51.00mm x 1.20mm
Raspberry Pi Pico RP2040 Microcontroller Board
Descripton:
The Raspberry Pi Pico is a microcontroller with an RP2040 chip featuring 2 x ARM Cortex-M0+ cores clocked at 133MHz; 256KB RAM; 2 MB of onboard Flash, 30 GPIO pins; and a range of interfacing options. It is a single-sided PCB measuring just 21mm x 51.3mm with a micro-USB port and 40 main user pins with through-hole pins to allow for surface mounting.
Details:
The Raspberry Pi Pico is a flexible and cost-efficient development platform that has been fully designed in house at Raspberry Pi, based on their very own RP2040 chip.
Key Features of the Raspberry Pi Pico:
RP2040 microcontroller with 2MB Flash memory that can be (re)programmed via USB or via the Serial Wire Debug (SWD) port
Micro-USB B port for power and data
40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
◦ Exposes 26 multi-function 3.3V General Purpose I/O (GPIO)
◦ 23 GPIO are digital-only and 3 are ADC capable
◦ Can be surface mounted as a module
3-pin ARM Serial Wire Debug (SWD) port
Uses an on-board buck-boost SMPS – allows for flexible options for powering the unit from micro-USB, external supplies or batteries
Specification:
- Dual-core cortex M0+ at up to 133MHz with an on-chip PLL allowing variable core frequency
- 264K multi-bank high-performance SRAM
- External Quad-SPI Flash with eXecute In Place (XIP)
- High performance full-crosspoint bus architecture
- On-board USB1.1 (device or host)
- 30 multi-function General Purpose IO (4 can be used for ADC)
- 1.8-3.3V IO Voltage (NOTE Pico IO voltage is fixed at 3.3V)
- 12-bit 500ksps Analogue to Digital Converter (ADC)
- Various digital peripherals
- 2x UART, 2x I2C, 2x SPI, up to 16 PWM channels
- 1x Timer with 4 alarms, 1x Real Time Counter
- Dual Programmable IO (PIO) peripherals
- Flexible, user-programmable high-speed IO
- Can emulate interfaces such as SD Card and VGA